Support

One person reads this inbox, and you will get a reply within two business days. There is no account and no ticket portal — your email address is the only thing that identifies you to us.

In the app, Settings › About › Contact Support writes the same mail with your version and macOS release filled in, so you can read it before you send it.

Getting help

How do I get help?

Email [email protected]. One person reads that inbox, and you will get a reply within two business days.

OpenBroom has no account system, so there is nothing to sign in to and no ticket portal to register for. Your email address is the only thing that identifies you to us.

What should I put in my email?

The more of this you include, the fewer round trips it takes:

  • Your macOS version, and whether it is an Intel or Apple silicon Mac.
  • The OpenBroom version, from Settings → About.
  • Which screen you were on: Sweep, DevClean, the disk map, Apps, Privacy, Protection or Settings.
  • Whether Full Disk Access is on, which Settings → Full Disk Access says.
  • What you expected to happen, and what happened instead.

Settings → About has a Contact Support button that fills the version and macOS release in for you. It opens a mail you can read in full before you send it.

What do you store when I email you?

Your email, and our replies to it, on a server we run. Nothing else, and nothing about your Mac that you did not put in the message.

OpenBroom itself has no telemetry and no account. The app does not know you wrote to us, and we cannot see your disk, your files or what you cleaned unless you paste it into an email.

Resolved conversations are deleted on a schedule. Please do not send us licence keys, passwords or anything else you would mind us holding.

I sent a message and heard nothing back

Check your spam folder first. If it is not there, the likely cause is on our side and it is a deliberate one: if your mail provider's DKIM signature does not validate, your address stays *unverified*, and OpenBroom's helpdesk will not send automatic mail to an address it has not proven. We still see your message; you do not get the receipt. Write from a different address, or say so and we will reply by hand.

Safety

Can OpenBroom delete something I needed?

It can delete what you tell it to, which is why nothing is deleted without you selecting it and pressing the button.

Three things stand between you and a mistake:

  • Protected locations are never removed, even if something inside them is selected. Documents, the Photos library, iCloud Drive, Mail and keys are off limits in code, not by convention.
  • Everything goes to the Trash unless you turn that off in Settings → Safety. The Trash is the undo.
  • Dry run in Settings → Safety shows exactly what would be cleaned and changes nothing.

Every item is also labelled Safe, Check first or Careful, and only Safe items are preselected.

What does "Safe" actually mean?

Safe means the file is regenerated on demand and nothing depends on it existing: caches, build output, package manager downloads. Losing it costs you the time to rebuild it and nothing else.

Check first means it is probably disposable but only you know: an old simulator runtime, a Docker volume, a container for an app you may still use.

Careful means read the row before you select it.

I cleaned something by mistake. Can I get it back?

If the Trash is still holding it, yes — put it back from the Trash, or use Undo in the app, which restores the last cleanup that used the Trash.

If you had turned on *Delete permanently instead of using the Trash*, no. That setting exists because some people want it, and the app says plainly what it does before you turn it on.

Why is the Trash the default instead of deleting outright?

Because a cleaner that is wrong once and unrecoverable is worse than a cleaner that frees slightly less space. Deleting to the Trash means a mistake costs you one drag back. It also means freed space does not appear until the Trash is emptied, which surprises people — that is the trade, and we think it is the right way round.

Permissions and what OpenBroom can see

Why does OpenBroom ask for Full Disk Access?

It does not require it. Without it, OpenBroom scans everything macOS lets any app read, which is most of what matters.

Full Disk Access adds the parts macOS fences off from every app by default: Mail's data, Safari's data, and the permission audit on the Privacy screen. If OpenBroom is not in the list in System Settings, click +, choose it, switch it on, and reopen the app.

Does OpenBroom send anything anywhere?

No. Scanning happens on your Mac and nothing leaves it. There is no account, no analytics, and no telemetry of any kind.

Three things touch the network, all of them only when you act:

  • The update check, when you press Check for Updates or leave automatic checks on.
  • The Buy a Licence and Contact Support buttons, which open your browser or your mail app.
  • Nothing else.

Licence activation is offline: your key is a signed statement the app checks by itself, so it works with the network off and nothing is reported to us.

What is in the crash report, and who sees it?

A crash writes a file to ~/Library/Logs/OpenBroom/. Nothing is sent. The next time you open the app it offers to put that file into a mail, which you can read in full before sending.

We do not use a crash-reporting service. An app that promises it sends nothing anywhere cannot quietly post stack traces to a vendor, so the choice is yours every time.

Licence and trial

What is free and what do I pay for?

Scanning, the disk map and the app list are free and stay free. A licence covers removing things — the cleaning itself.

So you can always see what OpenBroom found, measure your disk, and decide whether the number is worth anything to you before paying.

How long is the trial?

The trial runs from the first time you open the app, and the About panel shows the days left. Scanning keeps working after it ends; cleaning stops until you activate a licence.

Setting your Mac's clock back does not extend a trial. It does not shorten one either, in the sense that matters: the app remembers the latest date it has seen.

How do I activate my licence?

Settings → Licence, paste the key that came in your purchase email, press Activate.

It takes effect immediately, needs no network, and nothing is sent anywhere. Remove licence from this Mac frees the seat if you are moving to another machine.

My key will not activate

Check it was pasted whole, including the OB1. at the front. Keys are long and mail clients sometimes break them across lines; paste it as one line with no spaces.

If it still refuses, send us the order reference from your purchase email — not the key itself — and we will look it up.

Updates

How do updates work?

OpenBroom checks for a signed update, shows you what changed, and installs nothing unless you agree to it. Automatic checking is off until you turn it on in Settings → Updates.

Updates are signed with a key we hold, and the app refuses anything that does not verify, so an update cannot be substituted in transit.

Where do I get an older version?

Write to us. We keep the previous releases and will send you one if an update broke something for you — and we would like to know what broke.

Scanning and results

Why does OpenBroom find far less than another cleaner claims?

Because the other number probably includes things that are not free to delete. We count what is genuinely disposable and label the rest, rather than adding up everything removable and calling it reclaimable space.

If a competitor's number is much larger, it is usually counting application support data, mail attachments, or files you would miss.

Why is my `~/Library` so large?

Usually one or two applications, not the thousand small things people expect. Browsers and Electron apps are the common culprits: their caches live under Application Support rather than Caches, so tools that sweep ~/Library/Caches never see them.

The disk map is the fastest way to find out. Point it at ~/Library and look at what is actually big before deleting anything.

What is DevClean, and why is it hidden?

DevClean finds build output, package manager caches, simulator runtimes and Docker data — tens of gigabytes on a developer's Mac, and nothing at all on anyone else's.

It is off by default because most people are not developers and a screen full of Xcode caches is noise to them. Settings → Developer turns it on.

Can I drag something onto OpenBroom to see what it is?

Yes. Drop a file, a folder or an application onto the OpenBroom window or its Dock icon and it will tell you the size and what removing it would involve, and offer to remove it.

For an application, that includes the leftovers — caches, preferences, support data — that dragging an app to the Trash leaves behind.

Why can OpenBroom not remove some applications?

Applications installed for every user on the Mac are owned by the system rather than by you, so moving them to the Trash needs an administrator. OpenBroom shows them but will not pretend it can remove them.

Remove those the way they were installed: the vendor's own uninstaller, or the App Store.

Buying

How do I buy a licence?

Settings → Licence has a Buy a Licence button, which opens the store in your browser. Your key arrives by email as soon as the payment clears.

Can I get a refund?

Yes — write to us. That is also the honest reason the trial exists: we would rather you found out before paying.

Do you have a Mac App Store version?

Not yet. A store version is planned and will do less than this one — Apple's sandbox stops an app from reaching most of what a cleaner needs to clean, which is the whole reason the direct version exists.

If you bought the direct version, you have the full one.

Still stuck?

Write to [email protected] and say what you expected and what happened instead. What we do with that mail is set out in the privacy policy.